Flowserve CPM Series User Manual
Browse online or download User Manual for Hardware Flowserve CPM Series. Flowserve CPM Series User Manual
- Page / 8
- Table of contents
- BOOKMARKS
Summary of Contents
Installation InstructionsExperience In MotionCPM SeriesSingle, cartridge mounted, flexible stator pusher seal designed for general service applications
2DescriptionThe CPM PX seal is a cartridge mounted mechanical seal, designed for ease of installation and reliable operation. No seal setting dimensio
3Seal Chamber Requirements Figure 11.6 Check gland bolting to ensure that bolt diameter (M) and bolt
42 CPM PX InstallationNote: No seal setting measurements are needed to install the CPM PX seal. Instructions are for vertically split case end-s
52.4 Install the pump back plate (seal chamber) and bolt it in place on the bearing frame. See Figure 4.Figure 4Figure 5PumpBack PlateBearing Frame
62.8 Rotate the setting devices 180° from the sleeve drive collar and retighten. See Figure 6. Loosen the hex head bolts attaching the bronze
7 4 Operational Recommendations 4.1 Do not exceed corrosion limits. The CPM PX seal is designed to resist corrosion by most chemicals. However, do n
TO REORDER REFER TOB/M #F.O.FIS164eng REV 03-14 Printed in USAflowserve.comTo find your local Flowserve representativeand find out more about Flowserve C
More documents for Hardware Flowserve CPM Series
Related products and manuals for Hardware Flowserve CPM Series
(12 pages)
(8 pages)
(16 pages)
(8 pages)
(8 pages)
(8 pages)
(12 pages)
© 2020, manymanuals.com. All rights reserved. | 0.082 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals