13
Important notes
■ The installation of two low-level limiters in one standpipe is not allowed according to
TRD!
■ For the approval of the boiler standpipe the relevant regulations must be observed.
■ For typical installation examples refer to page 14.
■ When mounting the electrode laterally make sure that the inclination angle does not
exceed 45° and that the length of the electrode rod is limited to 1000 mm.
Fig. 11
■ If the electrode is installed outdoor, it must be provided with a weather-proof cover
supplied by GESTRA.
Tools
■ Open-end spanner A. F. 13
■ Open-end spanner A. F. 36
■ Scriber
■ Hacksaw
■ Flat file, cut 2
Installation – continued –
Comments to this Manuals